TiVo series2 dt User Guide
Appendix: Additional Setup Examples
128
A
Connections for a Satellite Box (with optional Basic Cable)
Antenna
In
INPUT
VIDEO
R
L
Television
RF Out
Satellite Box
RF In
Audio/Video Out
TiVo
®
DVR
Use cable bag
A
and cable bag
B
Connect all cables from the OUT jack
of one device to the IN jack of the next.
OUT
IN
Never connect OUT to OUT or IN to IN.
OUT
OUT
Connect your satellite
cable from the wall to your
satellite box
satellite box
This is probably already connected.
Connect your satellite
box to the DVR
Connect a Composite A/V cable (red,
white, and yellow) from the satellite
box’s Audio/Video OUT jacks to the
DVR’s Audio/Video IN jacks.
white, and yellow) from the satellite
box’s Audio/Video OUT jacks to the
DVR’s Audio/Video IN jacks.
(Optional)
Connect your
basic cable from the wall
If you have basic cable (with no
cable box) in addition to a satellite
box, connect the cable from the wall
to the DVR’s CABLE RF IN jack.
cable box) in addition to a satellite
box, connect the cable from the wall
to the DVR’s CABLE RF IN jack.
If you don’t subscribe to basic cable,
skip this step.
skip this step.
Connect your TV
Connect a Composite A/V cable (red,
white, and yellow) from the DVR’s
OUT jacks to your TV’s Audio/Video
INPUT.
white, and yellow) from the DVR’s
OUT jacks to your TV’s Audio/Video
INPUT.
Alternate: If your TV doesn’t have
Composite A/V (red, white, and
yellow) input jacks, connect a
Coaxial RF cable from the RF OUT
jack on the DVR to the Antenna In
jack on your TV. Then set the
Channel 3/4 switch on the back of
the DVR, and tune your TV to the
same channel.
Composite A/V (red, white, and
yellow) input jacks, connect a
Coaxial RF cable from the RF OUT
jack on the DVR to the Antenna In
jack on your TV. Then set the
Channel 3/4 switch on the back of
the DVR, and tune your TV to the
same channel.
Continue with Step
.
Gemini.book Page 128 Monday, April 10, 2006 11:06 AM