Lenovo A700 User Guide

Hardware Maintenance Manual

3.  The password dialog box will be displayed. Type the new password, and 

press Enter.

4.  when prompted to confirm the password, type the password again. If 

you type the password correctly, the password will be installed.

To change and delete a previously Power-On Password, do the following:

1.  From the Security menu, select Set Power-On Password and press 

Enter.

2.  The password dialog box will be displayed. Enter Current Password and 

press Enter. Press Enter in New Password and confirm New Password 
dialog. A setup notice will display that changes have been saved.

3.  Select Exit.
4. Select Save changes and Exit.
After the password is set, you may select the “Advanced” Menu for device setup.

Device is used to enable or disable user access to the following device
Audio Setup 

 

When this feature is set to Disable,    

 

the device of Audio Setup is   

 

 

disabled and will not be displayed in  

 

the system configuration.

To set Device, do the following:

1.  Start the Setup Utility program (see “Starting the Setup Utility program”
  on page 15).
2.  From the Setup Utility program menu, select Devices.
3.  Select Audio Setup.
4.  Select Disabled or Enabled and press Enter.
5.  Return to the Setup Utility program menu and press F10 to save 

configuration changes and exit setup.

If you do not want to save the settings, select Exit and select Discard
changes and Exit. You can set others such as Network Setup. 
See the information displayed on the right side of the screen.