Lenovo A700 User Guide

Hardware Maintenance Manual

7.  Push out the latches on both sides of the memory socket to release 

the memory module and gently pull the memory module upward to 
remove it from its socket . Both memory modules can be removed by 
using the same procedure.

8.  Align then insert the new memory module into the socket and push 

down on the top edge of the memory module. Make sure the latches 
lock the memory module in place.

9.  Align then install motherboard cover back.
10. Install the computer cover and stand.

Turn off the computer and wait 3 to 5 minutes to let the computer 
cool down before replacing the connectors module.

For this procedure, it helps to place the computer face-down on a 
soft flat surface. Lenovo recommends that you use a blanket, towel, 
or other soft cloth to protect the touch screen surface from scratches 
or other damage.

1.  Remove any media (diskettes, CDs, or memory cards) from the drives, 

shut down the operating system, turn off all attached devices, and the 
computer.

2.  Unplug all power cords from electrical outlets.
3.  Disconnect all cables attached to the computer. This includes power 

cords, input/output (I/O) cables, and any other cables that are 
connected to the computer. Refer to “Locating connectors on the rear 
of the computer”.

4.  Remove the computer stand. Refer to “Removing the computer stand”.
5.  Remove the computer cover. Refer to “Removing the computer cover”.