Rackmount smk-580 User Guide
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
Step 1
Find a convenient place to put your SMK-580. When mounting to a rack, attach the included
brackets to the sides of the SMK-580. Take note of the length of your cables so that your
computers keyboard, mouse and monitor are distanced properly.
Step 1
Find a convenient place to put your SMK-580. When mounting to a rack, attach the included
brackets to the sides of the SMK-580. Take note of the length of your cables so that your
computers keyboard, mouse and monitor are distanced properly.
Step 2
Now the PC connections can be made with the monitor (VGA) connections first. Connect a
VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear panel
of the KVM switch to the connector labeled VGA. Repeat this for all PCs.
Step 3
Connect the first computer’s mouse cable to the SMK-580. If using a PS/2 cable, connect one
end to the PS/2 mouse port on the computer, and the other end to the PC1 PS/2 mouse port on
the back of SMK-580. If using a serial mouse cable (optional), connect one end to a DB-9 serial
port on the computer, and the other end to the PC1 DB-9 serial mouse port on the back of the
SMK-580. If you need Serial DB-9 to PS2 Mini Din 6 pin adapter, please contact your supplier.
7