Axis 211M User Guide

Audio output/line out - Audio output (line level) can be connected to a public address (PA) system or an active 

speaker with a built-in amplifier. A stereo connector must be used for the audio out.

Power Connector - For connection of the PS-K power adapter (included).

I/O Terminal Connector - The I/O terminal connector provides the physical interface to one transistor output, 

one digital input and an auxiliary connection point for DC power. For more information, see I/O Terminal 

Network connector - The AXIS 211M connects to the network via a standard network cable, and automatically 

detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to 

power the AXIS 211M via Power over Ethernet (PoE). 

Serial Number - This number is used during installation. 
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service as described in the 

AXIS 211M Installation Guide or to restore the factory default settings, as described on page 36.

LED Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, and 

Power LED indicators flash as follows:

Network

Green

Steady for connection to 100 Mbit/s network. Flashes for network activity.

Amber

Steady for connection to 10 Mbit/s network. Flashes for network activity.

Unlit

No connection  
Note: The Network LED can be configured to be unlit during normal operation. See the online help files for more informa-
tion. Go to 

Setup > System Options > LED settings.

Status

Green

Shows steady green for normal operation.  
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. 
See the online help files for more information. Go to 

Amber

Steady during startup, reset to factory default or when restoring settings.

Red

Slow flash for failed upgrade.

Power

Green

Normal operation.

Amber

Flashes green/amber during firmware upgrade.