Pelco pmcl317 User Manual
8
C2926M-D (9/09)
Installation
The monitor can be installed using any of the following options:
•
Desktop Stand
•
Flat Wall Mounting
•
Rack Mounting
DESKTOP STAND
The monitor comes with a desktop foot stand attached, so it can be placed on any flat surface (desk or table). You can manually adjust the
PMCL300 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.
PMCL300 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.
To detach the stand, remove the four mounting screws from the back of the monitor.
WALL MOUNTING
The monitor can be mounted to a wall using one of the following optional mounts: PMCL-WM, PMCL-WMT, PMCL-WM1A, and PMCL-WM2A
wall mount kits if you want the monitor attached to the wall.
wall mount kits if you want the monitor attached to the wall.
•
The PMCL-WM mount has a maximum load capacity of 68 lb (30.8 kg).
•
The PMCL-WMT, PMCL-WM1A, and PMCL-WM2A mounts have a maximum load capacity of 90 lb (40.8 kg).
Figure 2. Wall Mount
To mount the monitor to a wall (refer to Figure 2):
1. Align the screw holes in the wall mount with the mounting holes in the back of the monitor.
2. Insert four M4 x 0.7 x 12 mm screws (not supplied), and tighten.
3. Refer to the applicable mount manual for instructions on how to attach the mount to the wall.
WARNING: Pelco strongly recommends that a professional installer performs the bracket and LCD monitor installation to ensure the
proper installation and attachment.
proper installation and attachment.
WALL MOUNT
(EXCLUDED)
VESA100
SCREW M4 X 0.7