Multi-Tech mvp400 User Guide

Clicking Others on the Main menu displays the Others Setup dialog box.  This dialog box lets you to
enable SNMP Agent (the default is 

disabled) and set up all the necessary parameters; enable or

disable various remote configuration methods such as TFTP (Trivial File Transfer Protocol) Server,
Web Server, Dumb Terminal, and Telnet Server; and assign a Password to the MultiVOIP for Internet
security.  These applications enable remote viewing and changing of the MultiVOIP configuration, or
updating firmware, from anywhere on the connected internetwork.

Verify that the desired applications are enabled (checked).  The default condition is all applications
are checked.  To disable a given application, click to uncheck the check box and disable support.

SNMP related operations can be performed only when the SNMP Agent is enabled (checked) on this
dialog box.  The IP address of the system (SNMP Manager) that will receive the Traps from the
MultiVOIP should be entered in the IP Address box in the Trap Manager group.  The Community
Name of the SNMP Manager receiving the Traps can be a maximum of 19 characters and is case
sensitive.  The default Port Number of the SNMP Manager receiving the Traps is 162.  The MultiVOIP
currently supports a maximum of two community users at a time, and they can be assigned either
Read/Write or Read Only rights.

For more information on using these applications, refer to Chapter 5, Remote Configuration and
Management.