Multi-Tech mtcba-g2-en2 User Guide
Chapter 1 – Product Overview
8
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Related Documentation
The following table describes additional documentation for each model.
Model Additional
Documentation
MultiModem MTCBA-E1-EN2 (EDGE)
You can configure the MultiModem MTCBA-E1-EN2 wireless router
using the EDGE AT Commands. For more information refer to the
Reference Guide for the MultiModem Wireless EDGE Modems, part
number S000474x.
using the EDGE AT Commands. For more information refer to the
Reference Guide for the MultiModem Wireless EDGE Modems, part
number S000474x.
MultiModem MTCBA-G2-EN2 (GPRS)
You can configure the MultiModem MTCBA-G2-EN2 wireless modem
using the GPRS AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless GPRS Modems, part
number S000463x
using the GPRS AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless GPRS Modems, part
number S000463x
MultiModem MTCBA-C1-EN2 (CDMA)
You can configure the MultiModem MTCBA-C1-EN2 wireless router
using the CDMA-C1 AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless CDMA-C1 Modems, part
number S000478x.
using the CDMA-C1 AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless CDMA-C1 Modems, part
number S000478x.
MultiModem MTCBA-H4-EN2 (HSPA)
You can configure the MultiModem MTCBA-H4-EN2 wireless router
using the HSPA AT Commands. These commands are documented in the
Reference Guide part number S000483x.
using the HSPA AT Commands. These commands are documented in the
Reference Guide part number S000483x.
MultiModem MTCBA-EV2-EN2
(EV-DO)
(EV-DO)
You can configure the MultiModem MTCBA-EV2-EN2 wireless router
using the EV-DO AT Commands. These commands are documented in
the Reference Guide part number S000482x.
using the EV-DO AT Commands. These commands are documented in
the Reference Guide part number S000482x.