Multi-Tech mvp130 User Manual
Cabling Guide
4
Multi-Tech Systems, Inc.
Safety Recommendations for Rack Mounting (continued)
•
Ensure that the MultiVOIP is properly connected to earth ground via a grounded power
cord. If a power strip is used, ensure that the power strip provides adequate grounding
of the attached apparatus.
cord. If a power strip is used, ensure that the power strip provides adequate grounding
of the attached apparatus.
•
Ensure that the mains supply circuit is capable of handling the load of the MultiVOIP.
Refer to the power label on the equipment for load requirements.
Refer to the power label on the equipment for load requirements.
•
Maximum ambient temperature for the MultiVOIP is 60 degrees Celsius (140
° F) at 20-
90%s non-condensing relative humidity.
•
This equipment should only be installed by properly qualified service personnel.
•
Only connect like circuits. In other words, connect SELV (Secondary Extra Low
Voltage) circuits to SELV circuits and TN (Telecommunications Network) circuits to TN
circuits.
Voltage) circuits to SELV circuits and TN (Telecommunications Network) circuits to TN
circuits.
•
To reduce the risk of shock, all access doors should be closed during normal operation
of the equipment.
of the equipment.
Package Contents: MVP-410/810 Models
•
One 4-port or 8-port MultiVOIP Analog or MultiVOIP SS or MultiVOIP FX unit
•
One power cord
•
One Command Cable (DB25-to-DB9 connectors)
•
Two rack mount brackets and four mounting screws
•
One printed Cabling Guide
•
One MultiVOIP CD containing software and user documentation.
Package Contents: MVP210 Models
•
One 2-port MultiVOIP unit (MVP210 or MVP210-SS or MVP 210-FX)
•
One two-part power cord
•
One Command Cable (DB9-to-RJ45 connectors)
•
One printed Cabling Guide
•
One MultiVOIP CD containing software and user documentation.