Multi-Tech mvp110 User Guide

The following installation procedures do not provide every screen or option in the process of installing
the MVP110 software. It is assumed that a technical person with a thorough knowledge of Windows
and the software loading process is doing the installation. Once you have installed the software, you
will be instructed on how to configure your MVP110, and finally, on how to deploy your MVP110.
Additional information on the MVP110 software is provided in Chapter 4, MVP110 Software, and in
the online Help.

Note: The phonebook directory configuration process is different depending on whether or not you
have an enabled H.323 Gatekeeper resident in your network. The section on “Configuring Your
MVP110” will explain these differences.

The MVP110 software and User Guide are contained on the MVP110 CD.  The CD is auto-
detectable, so when you insert it into your CD ROM drive it will start up automatically.  When you
have finished configuring your MVP110, you can view and print the User Guide by clicking on the
Install Manuals icon.

CAUTION: If you are installing a MVP110 behind a Firewall, the Firewall must support H.323. Refer
to your Firewall user documentation to enable H.323 support.

1.

Make certain that your MVP110 has been properly cabled and that it is powered on.

2.

Insert the MVP110 CD into a CD-ROM drive.  The CD is auto-detectable, so it starts
automatically.  It may take 10 to 20 seconds for the Multi-Tech Installation CD window to appear.

If the Multi-Tech Installation CD window does not appear automatically, click My Computer, then
right-click the CD-ROM drive icon, click Open, then click the Autorun icon.

3.

When the Multi-Tech Installation CD window displays, click the Install Software icon and choose
H.323 compatible from the Select Software dialog box.