Multi-Tech mvp200 Quick Setup Guide
7
Introduction
is set to Client, and the IP address of the Host MultiVOIP 200
is entered. Once all Client units are configured, the process
moves on to the “Deploying the VOIP Network” section.
is entered. Once all Client units are configured, the process
moves on to the “Deploying the VOIP Network” section.
Deploying the VOIP Network
The final phase of the installation is deployment of the network.
When the remote MultiVOIP 200s are sent to their remote
sites, the remote site administrators need only connect the
units to their LAN and telephone equipment. A full Phone
Directory Database (supplied by the Host MultiVOIP 200
Proprietary Phonebook will be loaded into their units within
minutes of being connected and powered up.
When the remote MultiVOIP 200s are sent to their remote
sites, the remote site administrators need only connect the
units to their LAN and telephone equipment. A full Phone
Directory Database (supplied by the Host MultiVOIP 200
Proprietary Phonebook will be loaded into their units within
minutes of being connected and powered up.
For remote VOIPs that were configured with the Gatekeeper
option enabled, each MultiVOIP 200 will be registered with the
Gatekeeper (i.e., the Gatekeeper phonebook directory is NOT
downloaded to the remote units).
option enabled, each MultiVOIP 200 will be registered with the
Gatekeeper (i.e., the Gatekeeper phonebook directory is NOT
downloaded to the remote units).