ASKProxima impression 970 User Guide

XGA

LCD MULTIMEDIA PROJECTOR

SETTING UP

1. 

Place the projector on a stable, hard
surface at the desired distance from
the projection screen.

2. 

Connect the computer source
equipment to the computer connector
port of the LCD projector.

3. 

Connect video sources if required,
using the supplied A/V cable. If
necessary use SCART adapter.

 

4. 

Connect one end of the mouse cable
marked ‘LCD’ into the mouse port on
the LCD projector and the other end
marked ‘MA’ (Mouse Adapter) into the
appropriate mouse adapter,
determined by which mouse type you
are using.

5. 

Ensure the ventilation grills on the
LCD projector are not obstructed.
Apply mains power to the projector.
Remember to switch on the unit at the
Power ON/OFF switch!

6. 

Apply mains power to the various
items of source equipment.

  Improper use of this LCD projector

may cause a risk of damage or personal
injury due for example to electric shock or
the strong light source. Detailed safety
instructions are given in the user guide and
these must be followed at all times.

USING THE REMOTE CONTROL

The key functions explained:

RESET

Defaults to the standard
settings for active source

ON/OFF

Turns the projected image
ON/OFF.

CONTR

Alters the contrast of light
and dark colors.

BRIGHT

Alters the brightness.

VOLUME

Volume up/down

FREEZE

Holds the image projected
on the screen

COMPUTER

Computer source active.

VIDEO

Video source active.

S-VIDEO

S-video source active.

MASK

Applies mask to the image.

SCALE

Direct 1:1 mapping/scaling.

PAN

Allows panning within
oversized images.

PROG

Programmed menu
selection

POINTER

Applies a trackball-controlled
pointer to the screen.

LIGHT

Keys are illuminated.

MENU

Activates the menu system.

TRACKBALL

Simulates the actions of the
desktop mouse.

LEFT KEY

Emulates left mouse key.

RIGHT KEY

Emulates right mouse key.

BOTTOM
KEY

Click-and-hold function
(drag).