Grandstream ht-502 User Manual
Grandstream Networks, Inc.
HT-502 User Manual
Page 14 of 32
Firmware 1.0.0.77
Last Updated: 1/2008
C
ONFIGURATION
G
UIDE
Configuring the HT502 Via Voice Prompts
DHCP
M
ODE
Select voice menu option 01 to enable HT502 to use DHCP.
STATIC
IP
M
ODE
Select voice menu option 01 to enable HT502 to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
set up IP address, Subnet Mask, Gateway and DNS server respectively.
F
IRMWARE
S
ERVER
IP
A
DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION
S
ERVER
IP
A
DDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE
P
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
between TFTP and HTTP.
F
IRMWARE
U
PGRADE
M
ODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1)
always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN
P
ORT
W
EB
A
CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.