Grandstream ht-502 User Manual
Grandstream Networks, Inc.
HT-502 User Manual
Page 18 of 32
Firmware 1.0.0.77
Last Updated: 1/2008
T
ABLE
7:
HT502
D
EVICE
S
TATUS
P
AGE
D
EFINITIONS
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. LAN and
WAN Mac addresses will appear in this place. The LAN MAC address will be used for
provisioning and can be found on the label coming with original box and on the label
located on the bottom panel of the device.
WAN Mac addresses will appear in this place. The LAN MAC address will be used for
provisioning and can be found on the label coming with original box and on the label
located on the bottom panel of the device.
WAN IP Address
This field shows WAN IP address of HT502.
Product Model
This field contains the product model info.
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.0.77 Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.7.
Core: current version 1.0.0.21
Base: current version is 1.0.0.54
upgrade. Current release is 1.0.0.77 Boot and Loader are seldom changed.
Bootloader: current version is 1.0.0.7.
Core: current version 1.0.0.21
Base: current version is 1.0.0.54
System Up Time
Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT502 is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the HT502 via its WAN port.
Port Status
Displays relevant information regarding the each FXS port.
Port
Hook
Registration
DND
Forward
Busy
Forward
Delayed
Forward
FXS1
On Hook
Registered
Yes
613
FXS2
On Hook
Registered
No
614
• Both FXS port1 and FXS port2 are registered with this SIP Server.
• FXS Port 1 user has set Do Not Disturb.
• FXS Port 1 user has set his calls to be forwarded unconditionally to ext 613.
• FXS Port 2 user has set his calls to forward to 614 when his phone is busy.