Grandstream ht-502 User Manual
Grandstream Networks, Inc.
HT-502 User Manual
Page 5 of 32
Firmware 1.0.0.77
Last Updated: 1/2008
C
ONFIGURE YOUR
HT502
Configuring your HT502 and connecting the unit to the VoIP network is very simple. The HT502 is easy to
configure using the embedded GUI pages and the following five (5) steps outlined below. Examples of the
GUI Interfaces can be downloaded from
configure using the embedded GUI pages and the following five (5) steps outlined below. Examples of the
GUI Interfaces can be downloaded from
: http://www.grandstream.com/user_manuals/GUI/GUI_HT502.rar.
Before you begin, please verify the contents of the HT502 package.
Equipment Packaging
Unpack and check all accessories. Equipment included in the package:
• one 12V universal power adapter
• one Ethernet cable
• one device unit
• one HT502 stand
Connect Your ATA
First, familiarize yourself with the features of the HT502. The HT502 has two FXS ports. Each FXS port
can have a separate SIP account. This is a key feature of HT502. Both ports can make calls concurrently.
can have a separate SIP account. This is a key feature of HT502. Both ports can make calls concurrently.
Figure 1: Connecting the HT502
T
ABLE
1:
D
EFINITIONS OF THE
HT502
C
ONNECTORS
Power Cable
Power adapter connection
WAN Port (RJ-45)
Connect to the internal LAN network or router.
LAN Port (RJ-45)
Connect the LAN port with an Ethernet cable to your PC.
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
PHONE1 (RJ-11)
FXS port to be connected to analog phones / fax machines.
PHONE2 (RJ-11)
FXS port to be connected to analog phones / fax machines.
There are five (5) LED buttons that help you manage the status of your HandyTone.
HT-502
Back View
RJ-45 Ports
10/100 Mbps
Reset
RJ-11 FXS Ports
(Phone)
Power
Supply
(12V)
Supply
(12V)
HT-502
Front View
Display LEDs
(green)