Pelco ip110-chv22 Specification Guide
PRODUCT SPECIFICATION
camera solutions
C3432 / REVISED 3-25-09
International Standards
Organization Registered Firm;
ISO 9001 Quality System
IP110 Series Camclosure
®
Network Camera System
INDOOR/OUTDOOR, NETWORK MINI DOME, SURFACE MOUNT
Product Features
•
Power over Ethernet (IEEE802.3af) or 24 VAC Power Input
•
Open Architecture
•
3 Simultaneous Video Streams
– Dual MPEG-4: 30 images per second (ips)
– Scalable MJPEG
– Scalable MJPEG
•
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, NTP
DNS, DHCP, RTP, NTP
•
Multilevel Password Protection
•
Weatherproof, Puncture Proof Bubble; Tamper-Resistant Hardware
•
8 Camera and Lens Options for Low Light Sensitivity, Extreme
Lighting, and Ultra High Resolution
Lighting, and Ultra High Resolution
– Day/Night Wide Dynamic Range (WDR)
– Day/Night High Resolution
– Color WDR
– Color High Resolution
– Day/Night High Resolution
– Color WDR
– Color High Resolution
•
Includes Video Service Connector for On-Site Setup
•
Alarm Input and Output
•
Thermostatically Controlled Heaters
•
Progressive Scan
•
Motion Detection
•
Up to 30 ips at 704 x 480 or 704 x 576 Resolution
The
IP110 Series Camclosure
®
is an indoor/outdoor, fixed mini
dome system with a built-in 100Base-TX network interface for live
streaming to a standard Web browser (Microsoft
streaming to a standard Web browser (Microsoft
®
Internet Explorer
®
or Mozilla
®
FireFox
®
). The network mini dome features open
architecture connectivity for third-party software recording solutions
and is also Endura Enabled
and is also Endura Enabled
™
to record, manage, configure, and view
multiple live streams.
When connected to an Endura
®
network-based video security
system, the mini dome has access to EnduraStor
™
and EnduraView
™
for optimized image quality and bandwidth efficiency. EnduraStor
dramatically extends the recording duration at a lower frame rate,
and EnduraView constantly monitors and automatically adjusts the
system for the best picture possible.
dramatically extends the recording duration at a lower frame rate,
and EnduraView constantly monitors and automatically adjusts the
system for the best picture possible.
The
IP110 Series Camclosure
supports Pelco camera application
programming interface (API) for customized software solutions,
giving users the flexibility to use third-party products.
giving users the flexibility to use third-party products.
The
IP110 Series Camclosure
has built-in Power over Ethernet
(PoE) IEEE802.3af, which supplies power to the camera using the
network, eliminating the need for a separate power supply and
reducing the cost of installation. For installation flexibility the unit is
also prewired for 24 VAC locally.
network, eliminating the need for a separate power supply and
reducing the cost of installation. For installation flexibility the unit is
also prewired for 24 VAC locally.
The
IP110 Series Camclosure
is perfect for a variety of indoor and
outdoor applications, and its versatile design allows for multiple
mounting options. It can be installed directly to a ceiling or wall.
It can also be installed to a 1.5-inch (3.81 mm) NPT fitting with the
optional pendant mount adapter (IP110-P). The unit can also mount
directly to a 4S electrical box using the optional adapter plate
(ICS110-AP) or a standard plaster ring.
mounting options. It can be installed directly to a ceiling or wall.
It can also be installed to a 1.5-inch (3.81 mm) NPT fitting with the
optional pendant mount adapter (IP110-P). The unit can also mount
directly to a 4S electrical box using the optional adapter plate
(ICS110-AP) or a standard plaster ring.
IP110
WEB
BROWSER
3rd PARTY
INTEGRATION
INTERNET
INTERNET
ENDURA
SYSTEM
IMPORTANT NOTE. PLEASE READ.
The network implementation is shown as a general representation only and is not intended to show a
detailed network topology. Your actual network will differ, requiring changes or perhaps additional
network equipment to accommodate the system as illustrated. Please contact your local Pelco
Representative to discuss your specific requirements.
The network implementation is shown as a general representation only and is not intended to show a
detailed network topology. Your actual network will differ, requiring changes or perhaps additional
network equipment to accommodate the system as illustrated. Please contact your local Pelco
Representative to discuss your specific requirements.