Pelco is310-chv9 Specification Guide

Page of 4
 
C3429 / REVISED 2-17-09
 
International  Standards
Organization Registered Firm;
 ISO 9001 Quality System
 
PRODUCT SPECIFICATION
 
camera solutions
 
Camclosure
 
®
 
 IS Series Rugged Bullet Enclosure
 
IS310 SERIES WALL/CEILING, WDR, DAY/NIGHT, HIGH RESOLUTION
Product Features
 
Fully-Integrated Enclosure with Camera and Lens
4 Camera Options:
– Day/Night Wide Dynamic Range (WDR): Pixel-Based Imager for 
Accurate Color Representation, Progressive Scan
– Day/Night High Resolution: 540 TVL
– Wide Dynamic Range (WDR): Pixel-Based Imager for Accurate 
Color Representation, Progressive Scan
– High Resolution Color: 540 TVL
Varifocal Lens Options: 3.0~9.5 mm, 9.0~22.0 mm
Includes Both Composite and Unshielded Twisted Pair (UTP) Outputs
Rugged, High-Impact, Vandal-Resistant, Tamper-Resistant Hardware
Service Connector for Video Output
Thermostatically Controlled Heater
Microporous Membrane Vent for Enhanced Ingress Protection
Meets NEMA Type 4X and IP66 Standards
Easy to Install
Versatile, Aesthetically Pleasing Bullet Design, Mounts to Wall or 
Ceiling
Concealed Cabling
 
Camera Modules
 
The 
 
IS310 Series Camclosure Integrated Camera System
 
offers a large selection of camera and lens options. Available
camera modules include:
 
Day/night wide dynamic range (WDR)
 
 and 
 
wide dynamic
range:
 
 Pelco’s WDR uses a pixel-based imager that adjusts for
lighting by pixel. Traditional CCD cameras adjust the entire image for
lighting conditions that appear in a small portion of the image or
lighting conditions that are not extreme. Different lighting problems
occur at night; car headlights and parking lot lights are good
examples of problematic video images. Use Pelco’s Day/Night WDR
where you need the camera to adjust from extreme lighting to low
light conditions. 
 
Day/night high resolution (540 TVL)
 
 color camera with auto iris,
varifocal lens: Application examples include environments that
require monochrome images at night and color images during the
day.
 
High resolution (540 TVL)
 
 color camera with auto iris, varifocal lens:
Application examples include all general-purpose environments.
 
 
 
Enclosure Module
 
The 
 
IS310 Series Camclosure
 
®
 
 Integrated Camera System
 
incorporates a camera and lens package into a small, unobtrusive
enclosure. The system is quick and easy to install in a variety of
indoor or outdoor applications. It is ideal for residential, office, mall,
hospital, school, parking garage, correction and detention, and other
medium-security installations subject to vandalism.
The 
 
IS310 Series
 
 is designed with a microporous membrane vent
that equalizes the internal and external pressure differential of the
enclosure. The vent offers enhanced ingress protection by repelling
water and dust, yet it allows for the free passage of vapors to
prevent condensation within the enclosure.
The 
 
IS310 Series
 
 
 
System
 
 can be mounted directly to a wall or
ceiling. The ICS310-AP adapter plate allows adaptation to a 2-gang
electrical box, the ICS310-SS sun shroud helps shield the unit from
sun in outdoor applications, and the ICS310-COND allows the unit to
be used in applications requiring conduit.
U.S. Patents 
D476,025; 6,715,939 B2; 6,805,498 B2
IP66