Denon AVR-2106 Operating Guide
ENGLISH
ENGLISH
28
Basic Operation
Basic Operation
Room EQ setting
2
Operate the Room EQ from the remote control
unit
unit
1
Press the
SURROUND PARAMETER
button.
• The surround parameter screen appears.
2
Press the
CURSOR D
D
or
H
H
button to select “Room
EQ”.
3
Press the
CURSOR F
F
or
G
G
button to select the
equalizer setting.
OFF
Normal
Front
Manual
Flat
4
Press the
ENTER
button to finish surround
parameter mode.
• The equalizer setting of Normal, Flat, and Front can be selected
after performing the Auto Setup.
• When headphone is connected, the Room EQ cannot be used.
2
Operate the Room EQ from the main unit
1
Press the
SURROUND PARAMETER
button.
• The surround parameter screen is appears.
2
Press the
SURROUND PARAMETER
button to
select “Room EQ”.
3
Turn the
SELECT
knob to select the equalizer
setting.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
pressed and the setting will be completed.
2
Surround parameters r
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small),
“medium”, “med.l” (medium-large) and “large”. “small”
recreates a small sound field, “large” a large sound field.
There are five settings: “small”, “med.s” (medium-small),
“medium”, “med.l” (medium-large) and “large”. “small”
recreates a small sound field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level
if the sound seems distorted.
The level can be set in 15 steps from 1 to 15. Lower the level
if the sound seems distorted.
DELAY TIME:
The delay time can be set within the range of 0 to 110 ms only
in the matrix mode.
in the matrix mode.
TONE CONTROL:
This can be set individually for each surround mode except
PURE DIRECT and DIRECT.
PURE DIRECT and DIRECT.
ROOM EQ:
This sets the frequency response of each speaker.
• OFF:
The Equalizer is not used.
• Normal:
Adjust the frequency response of all speaker suitable for
general surround system.
general surround system.
• Flat:
Adjust the frequency response of all speakers flat.
• Front:
Adjusts the characteristics of each speaker to the
characteristics of the front speakers.
characteristics of the front speakers.
• Manual:
Selects the setting value that was set in the Manual EQ setup.