Denon AVR-2106 Operating Guide
ENGLISH
52
Advanced Setup – Part 2
Advanced Setup – Part 2
ENGLISH
1
Press the
CURSOR D
D
or
H
H
button to select
“Auto Setup/Room EQ” at the “System Setup”
menu, then press the
menu, then press the
ENTER
button.
• The “Auto Setup/Room EQ” menu appears.
Setting the Manual EQ Setup
Others Setup
Adjust the tone of the various speakers except subwoofer
speaker while listening to the sound (music).
speaker while listening to the sound (music).
2
Press the
CURSOR D
D
or
H
H
button to select
“Manual EQ Setup”, then press the
ENTER
button.
• The “Manual EQ Setup” screen appears.
4
Press the
CURSOR D
D
or
H
H
button to select the
frequency.
6
Press the
ENTER
button to enter the setting.
• The “Auto Setup/Room EQ” menu appears.
3
Press the
CURSOR F
F
or
G
G
button to select the
speaker to be set.
The display changes as follows.
FL
1sp
FR
C
SL
SBL
SBR
SB
SR
When the surround back speaker setting is set to “1sp” at
“Speaker Configuration”, this is set to “SB”.
“Speaker Configuration”, this is set to “SB”.
5
Press the
CURSOR F
F
or
G
G
button to to adjust
the gain level.
Each frequency can be adjusted the range from –6 dB to +6
dB in 0.5 dB step.
dB in 0.5 dB step.
1
Press the
CURSOR D
D
or
H
H
button to select
“Room EQ Setup” at the “Auto Setup/Room
EQ” menu, then press the
EQ” menu, then press the
ENTER
button.
• The “Room EQ Setup” screen appears.
Setting the Room EQ Setup
Select the setting of an Equalizer that has been set with “Auto
Setup” or “Manual EQ”.
Setup” or “Manual EQ”.
3
-1
When “All” is selected:
Press the
Press the
ENTER
button.
• The “Select the EQ Curve” screen appears.
2
Press the
CURSOR F
F
or
G
G
button to select “All”
or “Assign”.
All:
The Equalizer to all surround mode is set as once.
Assign:
The Equalizer to each surround mode is to set individually.
3
-2
When “All” is selected:
Press the
Press the
CURSOR F
F
or
G
G
button to select the
equalizer setting.
OFF:
The Equalizer is not used.
Flat:
Adjust the frequency response of all speakers flat.
Normal:
Adjust the frequency response of all speaker suitable for
general surround system.
general surround system.
Manual:
Selects the setting value that was set in the Manual EQ
setup.
setup.
Front:
Adjusts the characteristics of each speaker to the
characteristics of the front speakers.
characteristics of the front speakers.
4
Press the
ENTER
button to enter the setting.
• The “Auto Setup/Room EQ” menu appears.