Axis P3301 User Guide

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video 
stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For 
more information, please see the online help.

The network camera includes support for Bonjour. When enabled, the camera is automatically detected by operating systems 
and clients that support this. 

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in 
The I/O Terminal Connector, on page 37.

The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all) 
when the unit is accessed. For a listing of all LED behavior, see page 6, or the online help. Note that the LED does not flash 
when the stream is retrieved using H.264 multicast.

•

Restart - the camera is restarted without changing any settings.

•

Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not reset 
are:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the  subnet  mask
• the system time

•

Default - the default button should be used with caution. Pressing this returns the camera's settings to the factory 
default values (including the IP address).

Upgrade Server - See Upgrading the Firmware, on page 39.

The 

Support Overview page provides valuable information on troubleshooting and contact information, should you require 

technical assistance.

System Overview provides an overview of the camera’s status and settings. Information that can be found here includes the 
camera’s firmware version, IP address, security, event and image settings and recent log items. Many of the captions are also 
links to the proper 

Setup page to conveniently make adjustments in the camera’s settings.