Axis P3301 User Guide
![Axis](https://files.manualsbrain.com/attachments/2cdeb21d573d7ed8b335382ee0e19cf8fedda40d/common/fit/150/50/dc67fcd8a1f55537e3ef402d62d3ffde0a4d24e935d5e4e4d8318365d539/brand_logo.jpeg)
5
AXIS P3301
Overview
Microphone - built-in microphone. This can be disabled by inserting a plug in the 'Audio in' connector.
Power Connector - for connection of the PS-H power adapter (included).
I/O Connector - the I/O terminal connector provides the physical interface to one transistor output, one digital input and an
auxiliary connection point for DC power. For more information, see The I/O Terminal Connector, on page 37.
Network Connector - The camera connects to the network via a standard network connector. Supporting NWay, the camera
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting PoE (Power over Ethernet), the
camera can be powered directly from the network cabling.
Audio Out - audio output (line level), which can be connected to a public address (PA) system or an active speaker with a
built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out.
Audio In - a 3.5 mm input for a mono microphone, or for a line-in mono signal (a stereo signal from line-in uses the left
channel).
Serial Number Label - the serial number may be required during installation.
Control Button - press this button until the status LED blinks green to install the camera using an AVHS service (see page
30), or the AXIS Internet Dynamic DNS Service described on page 31. To restore the factory default settings using the control
button, follow the instructions Resetting to the Factory Default Settings, on page 36.
Power Connector - for connection of the PS-H power adapter (included).
I/O Connector - the I/O terminal connector provides the physical interface to one transistor output, one digital input and an
auxiliary connection point for DC power. For more information, see The I/O Terminal Connector, on page 37.
Network Connector - The camera connects to the network via a standard network connector. Supporting NWay, the camera
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting PoE (Power over Ethernet), the
camera can be powered directly from the network cabling.
Audio Out - audio output (line level), which can be connected to a public address (PA) system or an active speaker with a
built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out.
Audio In - a 3.5 mm input for a mono microphone, or for a line-in mono signal (a stereo signal from line-in uses the left
channel).
Serial Number Label - the serial number may be required during installation.
Control Button - press this button until the status LED blinks green to install the camera using an AVHS service (see page
30), or the AXIS Internet Dynamic DNS Service described on page 31. To restore the factory default settings using the control
button, follow the instructions Resetting to the Factory Default Settings, on page 36.
Network
connector
Serial number (S/N)
Please make a note of the serial number and retain
The serial number is required during the installation.
for future reference.
Power
I/O terminal
connector
connector
Dome casing
connector
Camera unit
Power
indicator
indicator
Network
indicator
Audio out
Audio in
Status
indicator
indicator
Microphone
(LED)
(LED)
(LED)
Control
button
button
Cover
plates
plates
and PoE