Rocketfish RF-RBWS02 User Guide

RF-RBWS02

Connecting a device

• When you try to join a device to a network that has too 

many nodes, the device will stay in joining mode until it 
times out (30 second timeout). Upon timeout the unit 
should be on and will flash the power ring LED in a slow 
blink indicating it is not connected to the network.

When trying to change the 
source on a Rocketfish unit 
the Power LED flashes 5 
times.

• Your RF-RBKIT sender is in four channel lock mode. By 

design, these channels are not available for access by 
other receivers as they form the rears/surrounds of your 
Home Theater system. If you do wish to use them, then 
you should remove the four channel lock mode by 
moving the switch on the back of the sender to disable 
four channel lock mode. Both sources will then be 
available for all receivers.

5 V, 600 mA

2.0 Vrms

1.0 Vrms

10 K Ohm

90 dB

4.72 x 3.15 x 0.91 inches
(120 x 80 x 23 mm)

4.1 oz.
(116 g)

15 V, 1.5 A

8 C-cells (UM-2) (Alkaline or NiMH)

90dbA +/-3DbA

RF-RBWS02_09-0535_MAN_ENG_V1.fm  Page 27  Thursday, August 27, 2009  7:39 PM