Clarity c4205 User Manual

TABLE/DESK TOP INSTALLATION
CAUTION:

Disconnect the telephone line cord

before connecting or disconnecting the battery

backup in the wall mount bracket.
1. Plug one end of the supplied modular tele-

phone line cord into the jack marked TEL

located on the back of the telephone base

as shown in the diagram.

2. Plug the modular telephone line cord’s other

end into a modular phone jack.

3. Insert the supplied AC Adapter’s plug into the

jack marked 9V DC 400mA located on the

back of the telephone base.

4. Plug the adapter into a standard 120V AC

power (electrical) outlet.

5. Align the mounting bracket on the back of

the base so that the black rubber feet are

towards the bottom of the phone. Insert the

bracket’s tabs into the slots and secure the

bracket by sliding it upward.

6. Lift the base’s antenna to a vertical position.
7. Set the TONE/PULSE switch located on the

back of the base to correct dialing mode.

Please check with your local Phone Company

if uncertain of the type of service.

8. Place handset in the cradle to begin

initial charging.