NEC 1740cx User Manual

Page of 44
3
Specifications 
–continued
 
 
LCD Module
Diagonal:
9.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size:
9.0 inch
liquid crystal display (LCD); 0.294 mm dot
Native Resolution (Pixel Count):
280 x 024
pitch; 270cd/m2 white luminence;
550: contrast ratio, typical
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: DVI  
Sync:
Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors
Analog input:
6,94,277
Depending on display card used.
Maximum
Left/right:
70°/70° (CR>0)
Viewing Angles
Up/Down:
65°/60° (CR>0)
Synchronization
Horizontal:
3.5 kHz to 8. kHz
Automatically
Range
Vertical:
56 Hz to 76 Hz
Automatically
Resolutions Supported
720 x 400* : VGA text
Some systems may not support
640 x 480* at 60 Hz to 75 Hz
all modes listed.
800 x 600* at 56 Hz to 75 Hz
832 x 624* at 75 Hz
024 x 768* at 60 Hz to 75 Hz
52 x 864* at 70 Hz
52 x 870* at 75 Hz
NEC DISPLAY SOLUTIONS cites
280 x 960* at 60 Hz to 75 Hz
recommended resolution at 60 Hz for
280 x 024 at 60 Hz to 75 Hz................  optimal display performance.
Active Display Area
Horizontal :
376.0 mm/4.8 inches
Vertical :
30.0 mm/.9 inches
Power Supply
00-240 V ~ 50/60 Hz
Current Rating
0.8 - 0.5A/00-240V
Dimensions
405.5 mm (W) x 405.5 mm (H) x 205.0 mm (D)
6.0 inches (W) x 6.0 inches (H) x 8. inches (D)
Weight
5.5 kg
4.3 lbs
Environmental Considerations
Operating Temperature:
5°C to 35°C/4°F to 95°F
Humidity:
0% to 80%
Altitude:
0 to 0,000 Feet
Storage Temperature:
-0°C to +60°C/4°F to 40°F
Humidity:
0% to 85%
Altitude:
0 to 40,000 Feet
Monitor   
MultiSync 
Specifications 
1940CX 
Notes
*  Interpolated  Resolutions:  When  resolutions  are  shown  that  are  lower  than  the  pixel  count  of  the  LCD  module,  text  may  appear
 different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel
 technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution
 must be done.
 NOTE: Technical specifications are subject to change without notice.