NEC LCD1970NX User Manual

Controls

-continued

AccuColor

�

Control Systems

AccuColor

Control Systems: Six color presets select the desired color setting (sRGB

and NATIVE color presets are standard and cannot be changed).

R,G,B: Increases or decreases Red, Green or Blue color depending upon which is

selected. The change in color will appear on screen and the direction (increase or

decrease) will be shown by the bars.

NATIVE: Original color presented by the LCD panel that is unadjustable.

sRGB: sRGB mode dramatically improves the color ﬁdelity in the desktop

environment by a single standard RGB color space. With this color supported

environment, the operator could easily and conﬁdently communicate color

without further color management overhead in the most common situations.

Tools

OFF TIMER: Monitor will automatically power-down when the end user has se-

lected a predetermined amount of time.

HOT KEY: You can adjust the brightness and contrast directly. When this function

is set to ON, you can adjust the brightness with left or right control and contrast

with up or down control while the OSM menu is off.

FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control

settings back to the factory settings. The RESET button will need to be held down for

several seconds to take effect. Individual settings can be reset by highlighting the

control to be reset and pressing the RESET button.

Menu Tools

LANGUAGE: OSM

control menus are available in eight languages.

OSM LEFT/RIGHT: You can choose where you would like the OSM control

image to appear horizontally on your screen.

OSM DOWN/UP: You can choose where you would like the OSM control image

to appear vertically on your screen.

OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In the

OSM Turn Off submenu, you can select how long the monitor waits after the last

touch of a button to shut off the OSM control menu.

OSM LOCK OUT: This control completely locks out access to all OSM control func-

tions except Brightness and Contrast. When attempting to activate OSM controls

while in the Lock Out mode, a screen will appear indicating the OSM controls are

locked out. To activate the OSM Lock Out function, press SELECT, and right control

button and hold down simultaneously. To deactivate the OSM Lock Out, press

SELECT, and left control button and hold down simultaneously while in the OSM

menu.

RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If the resolu-

tion notiﬁer is turned ON, a message will appear on the screen after 30 seconds,

notifying you that the resolution is not at 1280 x 1024.

Information

The Information menu indicates the current input, display resolution, horizontal

and vertical frequency, and polarity settings of the monitor. The model and serial

numbers of your monitor are also indicated.