NEC LCD2060NX User Manual
7
Quick Start
–continued
This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the
monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Please use the attached screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the
monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Thickness of Bracket (Arm)
2.0~3.2mm
2.0~3.2mm
Tighten all screws.
Weight of LCD assembly: 6.9 kg (MAX)
If using other screws, check depth of hole.
100mm
100mm
Replace Screws
4 Screws (4M)
(MAX depth: 8.0mm)
(MAX depth: 8.0mm)
LCD2060NXManual021104.p65
2/11/04, 7:40 AM
7