NEC 42VP4 User Manual

15

The OSM window is displayed with respect to the
screen as shown on the diagram.

* Depending on the screen’s mode, the OSM may be

displayed differently.
In the explanation, the OSM section is shown close up.

The following describes how to use the menus and the
selected items.

1. Press the MENU/ENTER button on the remote control

to display the MAIN MENU.

2. Press the cursor buttons ▲ ▼ on the remote control to

highlight the menu you wish to enter.

3. Press the MENU/ENTER button on the remote control

to select a submenu or item.

4. Adjust the level or change the setting of the selected

item by using the cursor buttons 

  

 on the remote

control.

5. The adjustments or the settings that are stored in

memory.
The change is stored until you change it again.

6. Repeat steps 2 – 5 to adjust an additional item, or press

the EXIT button on the remote control to return to the
main menu.

Note: The main menu disappears by pressing the EXIT
button.

When “ADVANCED OSM” is set to “ON” in the main
menu (1/2), full menu items will be shown.