NEC 42VP4 User Manual
18
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
adjusted as desired.
Example: Adjusting the contrast
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “PICTURE”, then
press the MENU/ENTER button.
The “PICTURE” screen appears.
The “PICTURE” screen appears.
2. Use the ▲ and ▼ buttons to select “CONTRAST”.
PICTURE
1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
: NORMAL
: OFF
SEL.
RETURN
ADJ.
3. Use the
and
buttons to adjust the contrast.
CONTRAST
* If neither the
or
button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
reappears.
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
To delete the main menu, press the EXIT button once
more.
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
Information
Picture adjustment screen
CONTRAST ....
Changes the picture’s white level.
BRIGHTNESS
.. Changes the picture’s black level.
SHARPNESS
.. Changes the picture’s sharpness.
Adjusts picture detail of VIDEO
display.
display.
COLOR ...........
Changes the color density.
TINT ................
Changes the picture’s tint. Adjust for
natural colored skin, background, etc.
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
a computer signal is connected.
Restoring the factory default settings
Select “DEFAULT” under the “PICTURE MODE”
settings.
settings.
Setting the picture mode according to the
brightness of the room
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
according to the environment in which you are viewing
the display.
Example: Setting the “THEAT. 1” mode
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “PICTURE”, then
press the MENU/ENTER button.
The “PICTURE” screen appears.
The “PICTURE” screen appears.
2. Use the ▲ and ▼ buttons to select “PICTURE
MODE”.
PICTURE
1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
:
NORMAL
: OFF
SEL.
RETURN
ADJ.
3. To set to “THEAT. 1” ...
Use the
and
buttons to select “THEAT. 1”.
The mode switches as follows when the
and
buttons are pressed:
→
NORMAL
↔
THEAT. 1
↔
THEAT. 2
↔
DEFAULT
←
PICTURE MODE
:
THEAT. 1
* If neither the
or
button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
reappears.
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu. To
delete the main menu, press the EXIT button once more.
delete the main menu, press the EXIT button once more.
Information
Types of picture modes
THEAT. 1, 2 ......
Set this mode when watching video in
a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT. 2.
a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT. 2.
NORMAL .........
Set this mode when watching video in
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
DEFAULT .........
Use this to reset the picture to the
factory default settings.
factory default settings.