NEC 42VP4 User Manual

25

Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.

Example: Setting the “1080B” mode to “1035I”

1. Use the ▲ and ▼ buttons to select “OPTION1”, then

press the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the ▲ and ▼ buttons to select “HD SELECT”.

3. To set the HD SELECT mode to “1035I” ...

Use the 

 and 

 buttons to select “1035I”.

The mode switches as follows each time the 

 or 

button is pressed:

→

↔

↔

←

One of these 6 modes must be selected in order to
display the following signals correctly.

AUTO ..............

Select the suitable mode for the
specifications of input signals as
listed in the table “Computer input
signals supported by this system” on
page 41.

STILL ..............

To display VESA standard signals.
(Use this mode for a still image from
a computer.)

MOTION ..........

The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)

WIDE1 .............

When an 852 dot

 480 line signal

with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.

WIDE2 .............

When an 848 dot

 480 line signal

with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.

DTV .................

Set this mode when watching digital
broadcasting (480P).

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

These 3 modes are not displayed in correct image
automatically.

1080B

............... Standard digital broadcasts

1035I ...............

Japanese “High Vision” signal format

1080A

............... Special Digital broadcasts (for

example : DTC100)

When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.

Example: Set to “ON”

1. Use the ▲ and ▼ buttons to select “OPTION1”, then

press the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the ▲ and ▼ buttons to select “INPUT SKIP”.

3. To set the INPUT SKIP mode to “ON”...

Use the 

 and 

 buttons to select “ON”.

The mode switches as follows each time the 

 or 

button is pressed:

↔

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

OFF

........... Regardless of the presence of the signal,

scan and display all signals.

ON

............. If no input signal is present, skip that

signal.

* “SETTING NOW” will appear during the input search.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.