Emtec movie cube 40gb User Guide
1.1 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
following guide. * If the hard disk drive is already formatted, see “1.3 Copy Data via USB”.
1.1.1 Windows 98SE, ME
8
1) Install Windows 98 Driver. Find the driver at
Windows 98 CD
Windows 98 CD
→ Movie Cube EMTEC MOVIE
CUBE
→ English→ Windows 98 Driver Directory.
After finishing installation, Connect EMTEC MOVIE
CUBE to PC via USB cable. (If not detected, plug
power cable of EMTEC MOVIE CUBE)
2) Select [Start
CUBE to PC via USB cable. (If not detected, plug
power cable of EMTEC MOVIE CUBE)
2) Select [Start
→ Program→ Accessories→ MS-
DOS Prompt] on Windows.
3) Type “fdisk” command at Command Prompt
window and press [Enter].
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
3) Type “fdisk” command at Command Prompt
window and press [Enter].
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
5) Select “5. Change current fixed disk drive” and
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].