Akai Professional mpk 49 Software Guide
Vyzex MPK49 Firmware Upgrade PDF
4
OK – Preferences changed… Now What?
Now you can proceed with the firmware upgrade. Unzip the downloaded firmware update to your computer’s
desktop and confirm there is a SYX file inside. Always read the accompanying doc or text file for special
desktop and confirm there is a SYX file inside. Always read the accompanying doc or text file for special
information regarding the new firmware, and if everything is in order you can proceed with the update.
MPK49 now must ERASE its current firmware and be put in a special upgrade mode: This will
shut down the normal USB MIDI Ports that MPK49 presents to your computer’s operating
system and will open up a specialized USB MIDI Port to receive the update from Vyzex.
system and will open up a specialized USB MIDI Port to receive the update from Vyzex.
If you have the Vyzex editor software open while performing the firmware erase and restart,
Vyzex will not be able to track the change in USB MIDI ports and you will not be able to
proceed. Always close the software before proceeding with the MPK49 erase and restart
proceed. Always close the software before proceeding with the MPK49 erase and restart
procedure!
MPK49’s Erase & Restart Procedure
Now that the Vyzex application has been closed down, we’ll unplug MPK49’s USB cable and reconnect it with
three of the five front panel transport bar buttons held down at the same time.
Now that the Vyzex application has been closed down, we’ll unplug MPK49’s USB cable and reconnect it with
three of the five front panel transport bar buttons held down at the same time.
The buttons to hold down are <<, STOP, & REC as shown here:
MPK49 will now power-up displaying the following on its front panel LCD display:
Upgrade
ERASE OK?
PRESS
ENTER
This is your last chance to change your mind about upgrading the firmware: Once you press MPK49’s front
panel rotary encoder ENTER button, your MPK49 won’t have any firmware at all until you load the new
version, so be sure you are ready before proceeding.
version, so be sure you are ready before proceeding.
When you press ENTER, MPK49 will display ‘ERASING OS’ momentarily and then will inform you it is ready
to proceed with the update by displaying the following on its front panel display:
to proceed with the update by displaying the following on its front panel display:
Upgrade
00 SEND SYSEX
Now it’s time to re-open the Vyzex MPK49 editor program and use it to download the new firmware file.