Mamiya 645af User Manual

 

 

 

 

●

The shutter cannot be released when the batteries are discharged or no batteries 

are loaded. 

●

The shutter cannot be released while the film is being advanced. 

●

The shutter cannot be released while the flash is charging (while the flash mark is 

flashing) when the shutter release mode is set to "C" (continuous shooting) with a 
Metz flash mounted with the SCA 3951 adapter. The shutter can be released 
once flash charging is completed. 

●

The shutter cannot be released when the magazine is not mounted. 

●

The shutter cannot be released while the ISO sensitivity is being set after mounting 

the magazine. 

●

The shutter cannot be released when the magazine is mounted and the dark slide is 

inserted. 

●

The shutter cannot be released when the magazine is mounted and the rear lid is 

closed with the film wound up. 

●

When the mode setting button is pressed while the self timer is operating, the 

self timer is canceled and the shutter will not be released. 

●

When the exposure mode setting dial is turned while the self timer is operating, the 

self timer is canceled and the shutter will not be released. 

●

When the shutter release mode selector lever is operated while the self timer 

is operating, the self timer is

 

canceled and the shutter will not be released. 

●

When the focus mode selector lever is operated while the self timer is operating, 

the self timer is canceled and the shutter will not be released. 

●

When the exposure mode selector lever is operated while the self timer is 

operating, the self timer is canceled and the shutter will not be released. 

●

The shutter cannot be released when one of the error messages is displayed. 

●

When the shutter release mode selector lever is set to "L" during long exposures 

of over 1 second, the shutter closes and the long exposure mode is canceled. 

Put the neck strap through the camera's strap 
mount as shown on the diagram and tighten it. 
For safety, check that the strap is securely 
fastened to the strap mount. 

When using a tripod with 3/8 inch screw thread 
(instead of 1/4 inch screw thread) remove the 
small screw “A”

 

from the tripod screw hole on 

the bottom of the body using a Phillips 
screwdriver, then use a coin to remove the 
tripod screw adapter bushing “B”. 

This is the Port for connecting a Mamiya 
electromagnetic cable release (sold separately) 
when taking photos with the mirror up, with long 
exposures or with slow shutter speeds. 
 

 #804821  ............... 1m (3') 
 #804822 .................5m (15') 

79

80