Sony kdl-40z5100 User Guide

C:\Documents and Settings\kenji\Desktop\Work\4-140-825 Caper\11(2) 
EN\4140825112\4140825112_Caper EN_EN\01US05INS.fm

KDL-40Z5100/KDL-46Z5100/KDL-52Z5100

4-140-825-11(2)

All models except the 52 inch (measured diagonally) model can be mounted to a wall using the 
Wall-Mount Bracket (not supplied) out of the box as packaged. 

If you are mounting the 52 inch model to a wall, remove the Table-Top Stand. For removing the 
Table-Top Stand, refer to the instructions attached to the TV.

Prepare the TV for the Wall-Mount Bracket before making cable connections.

Sony strongly recommends that you use the Wall-Mount Bracket model designed for your 
TV (see page 45) and that wall-mounting of your TV should be performed by a Sony dealer 
or licensed contractor.

•

Follow the instruction guide provided with the Wall-Mount Bracket for your model. You 
may also need to refer to the online Reference Book for additional information for your TV 
model. Sufficient expertise is required in installing this TV, especially to determine the 
strength of the wall for withstanding the TV’s weight.

•

Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the 
mounting hooks to the TV set. (Do not use the screws that are intended for the Table-Top 
Stand attachment.)
The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when 
measured from the attaching surface of the mounting hook.
The diameter and length of the screws differ depending on the Wall-Mount Bracket model. 
Use of screws other than those supplied with the bracket may result in internal damage to 
the TV set or cause it to fall, etc.

•

Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready 
to attach the Table-Top Stand. Keep the screws away from small children. When you are 
using the Table-Top Stand, be sure to read page 17.

8-12 mm

M6 screw (supplied with the Wall-Mount Bracket)

Mounting Hook

Rear of the TV set