Sony DAV-DX150 Manual

To obtain the best possible surround sound, set 
for the size of the speakers you have connected 
and their distance from your listening position. 
Then use the test tone to adjust the level and the 
balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup 
Display. For details, see “Using the Setup 
Display” (page 72).
The default settings are underlined.

• You cannot operate these setup items when you 

connect headphones to the system.

Select the item, then press CLEAR. Note that 
only the [SIZE] setting does not return to the 
default setting.

x [SIZE]

If you do not connect center or surround 
speakers, or move the surround speakers, set the 
parameters for [CENTER] and [SURROUND] 
and specify the surround speaker position. Since 
the front speaker setting is fixed, you cannot 
change them.

• When you select an item, the sound cuts off for a 

moment.

• Depending on the settings of other speakers, 

subwoofer may be excessive.

x [DISTANCE]

The default distance setting for the speakers in 
relation to the listening position is shown below.
When you set the distance using the Quick Setup 
(page 27), the settings is automatically 
displayed.

SPEAKER SETUP

DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND): 

OFF

TEST TONE:

FRONT:
CENTER:

YES

BEHIND

YES

YES

SURROUND:
SUBWOOFER:

SIZE:

[YES]

[YES]: Normally select this.

[NONE]: Select this if no center 
speaker is used. 

[BEHIND]: Select this if surround 
speakers are located in section B.

[SIDE]: Select this if surround 
speakers are located in section A.

[NONE]: Select this if no 
surround speaker is used.

[YES]

A

A

B

B

Position diagram