Sony bdv-n890w User Manual
24
US
Gettin
g
Star
ted
Step 5: Performing the
Easy Setup
Easy Setup
Follow the Steps below to make the basic
adjustments and network settings for the system.
Displayed items vary depending on the country
model.
adjustments and network settings for the system.
Displayed items vary depending on the country
model.
1
Insert two R6 (size AA) batteries
(supplied) by matching the 3 and #
ends on the batteries to the markings
inside the compartment.
(supplied) by matching the 3 and #
ends on the batteries to the markings
inside the compartment.
2
Turn on the TV.
3
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
4
Press [/1.
5
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
selection appears.
6
Perform [Easy Initial Settings]. Follow
the on-screen instructions to make the
basic settings using
the on-screen instructions to make the
basic settings using
C/X/x/c and
.
Depending on the connection method
(page 18), perform the following setting.
• HDMI cable connection: Follow the
(page 18), perform the following setting.
• HDMI cable connection: Follow the
instructions that are displayed on the TV
screen.
screen.
• Video cord connection: Select [16:9] or
[4:3] so that the picture is displayed
correctly.
correctly.
For details about [Auto Calibration]
settings in [Easy Initial Settings], see
“Calibrating the Appropriate Speaker
Settings Automatically” (page 37).
settings in [Easy Initial Settings], see
“Calibrating the Appropriate Speaker
Settings Automatically” (page 37).
7
After completing of [Easy Initial
Settings], perform [Easy Network
Settings]. Press
Settings], perform [Easy Network
Settings]. Press
C/X/x/c to select [Easy
Network Settings], then press
.
The Easy Network Settings display
appears.
appears.
8
Follow the on-screen instructions to
make the network settings using
make the network settings using
C/X/x/
c and
.
If the system cannot connect to the network,
see “Network connection” (page 58) or
“Wireless LAN connection” (page 58).
see “Network connection” (page 58) or
“Wireless LAN connection” (page 58).
To recall the Easy Initial Settings
display/Easy Network Settings
display
display/Easy Network Settings
display
1
Press HOME.
The home menu appears on the TV screen.
2
Press
C/c to select
[Setup].
3
Press
X/x to select [Easy Setup], then
press .
4
Press
X/x to select the setting, then
press .
• [Easy Initial Settings]
• [Easy Network Settings]
• [Easy Network Settings]
C/X/x/c