Sony dav-dz340k User Guide

Ge
tting Star

Caution

• Contact a screw shop or installer for information regarding the wall material or screws to be used.

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.

• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

Before installing the tall full stand-type speaker on a wall

(DAV-DZ840K/DAV-DZ940K only)

Install only the upper part of the speaker.

Remove the protection sheets from the two pieces of double-sided tape on the speaker-
bottom cover, then attach the speaker-bottom cover to the bottom of the upper part of the
speaker.

Note

• When attaching the speaker-bottom cover, align it with the indentation on the bottom of the speaker.

To hang the speaker on a wall

Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.

When installing the speakers on a wall

Bottom of the upper part of
the speaker

Speaker-bottom cover

Protection sheets

Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray