Sony DAV-X1 User Guide
Se
tti
ng
s an
tti
ng
s an
d Ad
ju
st
me
n
ts
79
US
Use this to set up playback related and other
settings.
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 75).
The default settings are underlined.
To use the display, see “Using the Setup
Display” (page 75).
The default settings are underlined.
x [PAUSE MODE] (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 76). (Depending on
the disc, this function may not work.)
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 76). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 39).
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 39).
x
AUDIO (HDMI)
Selects the type of audio signal output from the
HDMI OUT jack.
HDMI OUT jack.
• A loud noise (or no sound) will be output if you
connect the system to a TV that is not compatible
with DOLBY DIGITAL/DTS (digital theater system)
signals and [AUTO] is selected. In this case, select
[PCM].
with DOLBY DIGITAL/DTS (digital theater system)
signals and [AUTO] is selected. In this case, select
[PCM].
Custom Settings
[CUSTOM SETUP]
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
that do not move dynamically, is
output in high resolution.
[OFF]
No priority given.
[AUTO]
Priority given.
Note
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO
PAUSE MODE:
OFF
TRACK SELECTION:
ON
AUDIO(HDMI):
OFF
[ON]
Stores the resume settings in
memory for up to 40 discs.
memory for up to 40 discs.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the system.
in memory. Playback restarts at
the resume point only for the
current disc in the system.
[OFF]
The sound is not output from the
HDMI OUT jack.
HDMI OUT jack.
[AUTO]
Outputs current audio signals.
[PCM]
Converts Dolby Digital, DTS
(digital theater system), or 96 kHz/
24 bit PCM (pulse code modulation)
signals to 48 kHz/ 16 bit PCM (pulse
code modulation).
(digital theater system), or 96 kHz/
24 bit PCM (pulse code modulation)
signals to 48 kHz/ 16 bit PCM (pulse
code modulation).
Note