Sony ht-6900dp User Guide

Page of 60
masterpage:Left
lename[E:\SEM_Janet\Revision_HT-
950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm]
  Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]
 [2-549-736-12(1)]
22
US
Adjust the speaker levels and balance while 
listening to the test tone from your listening 
position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency 
centered at 800 Hz.
1
Press ?/1 to turn on the receiver.
2
Press TEST TONE.
“T. TONE” appears in the display and the 
test tone is output from each speaker in 
sequence.
Front (left) 
t Center t Front (right) t 
Surround (right) 
t Surround back t 
Surround (left) 
t Sub woofer
3
Adjust the speaker levels and balance 
using the LEVEL menu so that the level 
of the test tone sounds the same from 
each speaker.
For details on the LEVEL menu settings, 
see page 36.
Tips
• To adjust the level of all speakers at the same 
time, press MASTER VOL +/– on the remote or 
turn MASTER VOLUME –/+ on the receiver.
• The adjusted value are shown in the display 
during adjustment.
4
Press TEST TONE again after 
adjustment.
The test tone turns off.
Notes
• (HT-9950M, HT-9900M and HT-6900DP only) 
The test tone cannot be used when MULTI CH IN 
function is used.
• Although these adjustments can also be made via the 
front panel using the LEVEL menu (when the test 
tone is output, the receiver switches to the LEVEL 
menu automatically), we recommend you follow the 
procedure described above and adjust the speaker 
levels from your listening position using the remote.
7: Adjusting the speaker 
levels and balance
— TEST TONE
US01COV_HT-5950DP-CA.book  Page 22  Monday, April 11, 2005  11:37 AM