UMAX 1200s User Guide

 
 

This operation manual contains all the information you need to install your scanner.  For quick 
installation instructions, see the Quick Start Guide accompanying your scanner. 
 

  Make Sure the power is OFF before installing. 

 
 
Important Safeguards 
 

•  Read all of instructions. 
•  Save these instructions for later use. 
•  Follow all warning and instructions marked on the product. 
•  When replacement parts are required, be sure that service technician has used 

replacement parts specified by the manufacturer that have the same result in fire, electric 
shock, or other hazards. 

•  Do not use this product near water or in rainy/moist situation. 
•  Do not place on an unstable table to avoid the series of damage to the product. 
•  The product should be operated only from the type of power source indicated on the 

marketing label. 

•  Do not attempt o service this product yourself as opening or removing the enclosure may 

expose you to dangerous voltage or other hazards. 

•  This unit has an autoranging input circuitry suitable for 120Vac and 240Vac. 
•  The sound pressure level at the operators position according to IEC 7041:1982 is equal or 

less than 70dB(A). 

•  The following adapters are approved to be used with TUV-GS: 

ADP-12CB Rev. B/Delta, ADP-12CB Rev. C, WP10XY/Dow Dec, HES 10-311/Hitron. 
For UL CSA Listed products, the adapter shall be UL, CUL, or CSA Listed Class 2 
Power Supply. 
 
 
 
 
 
 
 

Part No.:  830504-00 

 
 
 

 

1