UMAX 1220 Quick Setup Guide

A.

B.

C.

D.

                      

E.

                    

Before operating the scanner, please unlock the restraint.
To unlock the restraint, move the restraint toward the

unlocked position 

 as shown in picture A.

1. Turn off the computer and remove the housing cover.
2. Locate an available slot.
3. Insert the SCSI card by pressing it gently into the slot

as shown in picture B.

4. Replace the cover housing.

1. PC users--Connect the SCSI cable to the SCSI

interface card (see picture C).
Mac users--Connect the SCSI cable to the SCSI port
on your Macintosh (see picture D).

2. Connect the other end of the SCSI cable to the

scanner.

3. If your scanner is not chained to other SCSI devices,

connect the Terminator that came with your scanner
to the remaining SCSI port on your scanner.

Plug in the power adapter cord as shown in picture E.

Lock      Unlock