Uniden um625c User Guide
![Uniden](https://files.manualsbrain.com/attachments/a4aa550ab582d07b001048f5823bf285f43f85f5/common/fit/150/50/6a2ec42ad688801ad16246bf4b638c3e43a0954430fefd57a2516b4752a6/brand_logo.jpeg)
20
Using Step
Step lets you quickly tune through the channels you saved in the radio's memory. To use step,
repeatedly press STEP/SCAN. The radio tunes a channel you stored in memory each time you
press STEP/SCAN.
repeatedly press STEP/SCAN. The radio tunes a channel you stored in memory each time you
press STEP/SCAN.
Using Hail
Note: You must connect one or two optional hailer horns to the radio to use the hail feature.
To enable the hail feature, press HAIL/INTERCOM. A selection screen appears. Then select
the hailer you want to use (Hailer 1, Hailer 2, or both ) then press PUSH/SELECT to select it.
Next, press PTT to speak.
the hailer you want to use (Hailer 1, Hailer 2, or both ) then press PUSH/SELECT to select it.
Next, press PTT to speak.
appears. Release PTT to listen. LISTEN ÿ appears. You
hear any response to your hail through the radio's speaker.
To adjust the hail outgoing volume, repeatedly press
To adjust the hail outgoing volume, repeatedly press
or
on the microphone or rotate
PUSH/SELECT on the radio. To exit hail, press HAIL/INTERCOM again.
Using the Intercom
The intercom feature lets you call optional WHAM x 4 microphones connected to the radio.
You can select and call one microphone, or individually add each of several microphones to a
temporary group using the Intercom Menu, or each microphone connected to the radio.
You can select and call one microphone, or individually add each of several microphones to a
temporary group using the Intercom Menu, or each microphone connected to the radio.
Notes:
•
You cannot use a WHAM wireless microphone to use the intercom.
•
WHAM x 4 microphone users can also call each other and the radio.
•
If the WHAM x 4 microphone user cannot connect with the radio, the intercom feature does
not work and the radio sounds an error tone.
not work and the radio sounds an error tone.
•
Intercom mode is cancelled if 16/9 TRI or DISTRESS is pressed.
Follow these steps to use the intercom.
1. Hold down HAIL/INTERCOM for about 2 seconds.
1. Hold down HAIL/INTERCOM for about 2 seconds.
2. Follow one of these steps to select one or all WHAM x 4 microphones connected.
a. To select one WHAM x 4 microphone, rotate PUSH/SELECT until the WHAM x 4
microphone you want to talk to is highlighted on the INTERCOM screen then press PUSH/
SELECT to select it.
microphone you want to talk to is highlighted on the INTERCOM screen then press PUSH/
SELECT to select it.
b. To create a temporary group of WHAM x 4 microphones, rotate PUSH/SELECT and
select each mic listed. Rotate PUSH/SELECT and press the knob to add it to the group. A
check
select each mic listed. Rotate PUSH/SELECT and press the knob to add it to the group. A
check
icon appears for that mic.
c. To select all the connected mics, rotate the PUSH/SELECT until ALL is highlighted. Press
the knob to select all the mics.
d. To call each microphone instead of all, rotate PUSH/SELECT to select CALL, then press
PUSH/SELECT to select that mic. A check icon appears next to the selected mic on the
radio’s display and each selected microphone sounds an audible tone. When you select
CALL and press PUSH/SELECT, you call another checked WHAM x 4 mic.
the knob to select all the mics.
d. To call each microphone instead of all, rotate PUSH/SELECT to select CALL, then press
PUSH/SELECT to select that mic. A check icon appears next to the selected mic on the
radio’s display and each selected microphone sounds an audible tone. When you select
CALL and press PUSH/SELECT, you call another checked WHAM x 4 mic.
TALK
Basic Operation
LISTEN