Utstar gsm708 User Guide

Page of 54
Getting Started
15
16
Low Battery Indicator
3
To remove the adapter from the phone, press the buttons on both
sides of the connector (see  ) and pull the charger plug out 
(see  ).
1
1
2
Getting Started
When the battery charge level is low, an empty battery status icon
appears at the top right of the display. 
When the battery level gets too low, the phone turns off automatically.
Unfortunately, if this happens, you lose whatever you are doing and
your phone call cuts off. Watch the battery status icon and make sure
your battery is adequately charged.
Switching the Phone On or Off
1
Press and hold the         key for more than one second to switch 
the phone on.
� � �
Note : If you switch the phone on without a SIM card, 
the phone prompts you to insert the card. Although you switch the
phone on without a SIM card, you can make emergency calls.
2
When the PIN code of your SIM card is enabled, your phone
asks you to enter the PIN (see page 69). Enter the code, 
and press the            soft key. 
3
The date Set screen appears. Set the date (see page 65).
Then the Time Set screen appears. Set the time (see page
64). The phone is now in Standby Mode.
� � �
Note : If the phone is out of the service area, No network
limited service appears on the display and you cannot place and
receive calls. Wait a little while for a better signal or move into an open
area to regain service.
WARNING!
Do not switch the phone on when using the mobile phone is prohibited
or it may cause interference or danger.