Utstar gz one type v User Guide

G’zOne Type-V 

G’zOne Type-V 

1. Press and hold 

until the display turns off.

1. Enter the phone number (include the area code if needed).

2. Press 

.

lf the phone is locked, enter the lock code.
If CALL FAILED appears the call did not go through.

3. Press 

to end the call.

If you make a mistake while dialing a number, press 

once to

erase the last digit entered, or hold 

down for at least 2 seconds

to delete all digits.

1. Press 

twice to redial the last number you dialed. The last 90

numbers are stored in the call history list and you can also select
one of these to redial.

1. When the phone rings or vibrates, press 

to answer. 

If you press Left Soft Key 

while the phone is ringing, the

ringing or vibration is muted for that call.

If you press Right Soft Key 

while the phone is ringing, the

call will end.

2. Press 

to end the call.

The charge time varies depending upon the battery level. The maximum
charge time for a fully discharged standard battery is 2 hours.

The battery charge level is shown at the top right of the LCD screen.
When the battery charge level becomes low, the low battery sensor
alerts you in three ways: Sounding an audible tone, blinking the
battery icon, and displaying LOW BATTERY WARNING! If the battery
charge level becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.

Fully Charged

Fully Discharged

1. Press and hold 

until the LCD screen lights up.

Avoid any unnecessary contact with the antenna while your phone is on.