Utstar xv6700 User Manual

73

 

|

 

Managing Your XV6700

Occasionally you may need to reset your XV6700. A normal (or soft) reset of your XV6700 

clears all active program memory and shuts down all active programs. This can be useful 

when the device is running slower than normal, or a program is not performing properly. 

A soft reset is also necessary after the installation of some programs. If a soft reset is 

performed when programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be 

performed only if a normal reset does not solve a system problem. After a hard reset, the 

device is restored to its default settings—the way it was when you first purchased it and 

turned it on. Any programs you installed, data you entered, and settings you customized on 

the device will be lost. Only Windows Mobile software and other pre-installed programs will 

remain.

•  Use the stylus to lightly press and hold the RESET button on the bottom of your XV6700. 

The device restarts, then displays the Today screen.

Reset button

 

Always turn off your device before performing a soft reset or installing/replacing the battery.

Press and hold both SOFT KEYS on the device. Keep these keys pressed, and at the 

same time, use the stylus to lightly press and hold the RESET button on the bottom of 

your XV6700.

Press either 

 to restore to factory default or 

 to exit the hard reset process.