Allied Telesis at-8516f User Guide
50
Rapier Switch User Guide
Software Release 2.6.1
C613-02025-00 REV C
C613-02025-00 REV C
Remote Management
You can manage remote switches as easily as you manage the local switch a
terminal is connected to. From a terminal connected to any port (with either
USER or MANAGER privilege), enter the command:
terminal is connected to. From a terminal connected to any port (with either
USER or MANAGER privilege), enter the command:
TELNET ipadd
to Telnet to the remote switch, specifying the remote router’s IP address.
switchFor information about how to set routes and on how you assign an IP
address to your switch, see “Setting Routes” on page 16 and “Assigning an IP
Address” on page 15.
address to your switch, see “Setting Routes” on page 16 and “Assigning an IP
Address” on page 15.
If the connection is successful, a login prompt from the remote switch is
displayed. Login using a login name that has been defined with MANAGER
privilege (such as the default MANAGER login name), and enter the
password.
displayed. Login using a login name that has been defined with MANAGER
privilege (such as the default MANAGER login name), and enter the
password.
To return to the local switch and terminate the connection, enter the command:
LOGOFF
For more information about using Telnet, see the Terminal Server chapter in the
Rapier Series Switch Software Reference.
Rapier Series Switch Software Reference.
SET PPP TEMPLATE
SET SA
SET SCR
SET SNMP COMMUNITY
SET SSH
SET STAR
SET USER
SHOW CONFIG
SHOW ENCO KEY
SHOW FEATURE
SHOW FILE
SHOW NVS
SHOW PPP
CONFIG
SHOW STAR
[=id], MKTTRANSFER, NETKEY
UPLOAD
Table 5: Commands requiring SECURITY OFFICER privilege when the switch is
operating in security mode (Continued).
operating in security mode (Continued).
Command
Specific Parameters