Sony VPL-PX1 User Guide

10

 (GB)

Location and Function of Controls

1

I 

 

1 (on / standby) key

Turns on and off the projector when the projector is in
the standby mode. The ON/STANDBY indicator
lights in green when the power is turned on.
When turning off the power, press the 

I

 / 1 key

2

Selects the input signal. Each time you press the key,
the input signal switches between video/audio input
and INPUT A connector.

3

Displays the on-screen menu. Press again to clear the
menu.

4

Enters the settings of items in the menu system.

5

Resets the value of an item back to its factory preset
value. This key functions when the menu or a setting
item is displayed on the screen.

6

M/m/</,)

Used to select the menu or to make various
adjustments.

7

Adjust the volume of the built-in speakers and output
level of the AUDIO OUT jack.

 Increases the volume.

 Decreases the volume.

8

Adjusts a picture to be projected clearest
automatically while a signal from the computer is
input.

9

LAMP/COVER: Lights up or flashes under the

following conditions:
• Lights up when the lamp has reached the end of

its life or becomes a high temperature.

• Flashes when the lamp cover or air filter cover

is not secured firmly.

TEMP (Temperature)/FAN: Lights up or flashes

under the following conditions:
• Lights up when temperature inside the projector

becomes unusually high.

• Flashes when the fan is broken.

Lights up when the projector is

in the power saving mode. When POWER
SAVING in the SET SETTING menu is set to
ON, the projector goes into the power saving
mode if no signal is input for 10 minutes.
Although the lamp goes out, the cooling fan
keeps running. In the power saving mode, any
key does not function for the first 30 seconds.
The power saving mode is canceled when a signal
is input or any key is pressed.

ON/STANDBY: Lights up or flashes under the

following conditions:
• Lights in red when the AC power cord is

plugged into the wall outlet. Once in the
standby mode, you can turn on the projector
with the

I / 

1 key on the Remote Commander or on the

control panel.

• Lights in green when the power is turned on.
• Flashes in green while the cooling fan runs after

turning off the power with the 

I / 

1 key. The

fan runs for about 90 seconds after turning off
the power.
The ON/STANDBY indicator flashes quickly
for the first 30 seconds.
During this time, you cannot turn the power
back on with the 

I / 

1 key.

APA

VOLUME

INPUT

MENU

ENTER

RESET

ON

/STANDBY

POWER
SAVING

TEMP

/FAN

LAMP

/COVER

9

1

2

3

4

8

7

6

5