Sony VPL-VW200 Manual

 

48

The Setup menu is used to change the factory preset settings, etc.

Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus, 
message when turning off the power, and warning messages.

Selects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese (Simplified Chinese), Chinese (Traditional Chinese), 
Korean, Thai and Arabic.

Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of 

1,500 m or higher.

Standard: Use this setting when using the projector at normal 

altitudes.

When this item is set to “High”, the fan noise becomes slightly 
louder since the number of fan rotation increases.

Sets to lower the power consumption in standby.
Standard1: Sets power consumption to normal.
Standard2: Sets the network function ineffective and reduces power 

consumption lower than “Standard1”.

Low: Reduces power consumption lower than “Standard2”.

When this item is set to “Low”, the HDMI Control function and the 
network function will not operate in standby.

Sets the power saving mode.
When set to “On”, the projector goes into power saving mode if no 
signal is input for 10 minutes. At that time, the ON/STANDBY 
indicator lights in orange, then the screen becomes dark. In power 
saving mode, the power saving mode is cancelled if a signal is input 
or any button is pressed. If you do not want to set the projector to 
power saving mode, select “Off”.