Sony VPL-VW85 Manual
70
7
Remove the filter holder.
8
Remove the air filter.
9
Attach the new air filter so that it
fits into the each claws (10
positions) on the filter holder.
fits into the each claws (10
positions) on the filter holder.
Attach the air filter aligning it with the
shape of the filter holder.
Also, do not touch the fan after removing
the air filter that is set deep inside the
projector.
shape of the filter holder.
Also, do not touch the fan after removing
the air filter that is set deep inside the
projector.
10
Attach the filter holder.
The projector will not turn on unless the
filter holder is securely closed.
filter holder is securely closed.
11
Wipe dust off the ventilation
holes (intake) with a soft cloth.
holes (intake) with a soft cloth.
12
Place the project back on its
original position.
original position.
13
Turn on the projector, then
select the desired setting item
on the Setup
select the desired setting item
on the Setup
menu. The
menu screen below will be
appeared.
appeared.
14
Select “Yes”.
Do not put your hands into the lamp
replacement slot, and do not allow any liquid or
other objects into the slot to avoid electrical
shock or fire.
replacement slot, and do not allow any liquid or
other objects into the slot to avoid electrical
shock or fire.
• Be sure to use an LMP-H201 Projector Lamp
for replacement. If you use lamps other than
the LMP-H201, the projector may
malfunction.
the LMP-H201, the projector may
malfunction.
Note
Note
Claws
Caution
Notes
Ventilation holes (intake)