Utstar xv6800 User Guide

Getting Connected  93

You can use Wi-Fi or dial-up to connect your device to the Internet or your company network.

Wi-Fi provides wireless Internet access over distances of up to 100 meters. To access the Internet via Wi-Fi on 
your device, you need access to a wireless network or hotspot.

Note  The availability and range of your device’s Wi-Fi signal depends on the number, infrastructure, and other objects 

through which the signal passes.

At the lower left side of your device, slide the WLAN Switch upward to turn Wi-FI on, downward to turn Wi-Fi 
off. The icons on the switch represent the following:

 :  Wi-Fi is turned on.

 :  Wi-Fi is turned off.

After Wi-Fi has been turned on, your device then scans for available wireless networks or hotspots 
in your area. The network names of the detected wireless networks will be displayed on a pop-up 
message window. Tap the desired wireless LAN, then tap OK.

On the next pop-up message window, tap The Internet if the wireless LAN connects your device to the 
Internet. Otherwise, tap Work if the wireless LAN connects your device to a private network.

If the wireless LAN is secured by a network key, enter this key, then tap Connect.

Next

time you use your device to detect wireless networks, you will not see the pop-up message 

windows again, and you will not be prompted to enter the network key of the previously accessed 
wireless network (unless you perform a hard reset which will erase custom settings on your device).