Snom 300 Installation Instruction
8 • Installation
[
s n o m
3 0 0 Q
u i c k
i
n s t a l l a t i o n
V 1 . 0 2 ]
1
English
3
Rotate the footstand 180° around its vertical axis.
4
Insert the outside, rear snap-fits into the mounting
holes on the bottom shell (Fig. 4, arrow no. 1). Tilt
the footstand forward and downward until the snap-
fits snap into place in the mounting holes (arrow no.
2). Please, make sure that the four snap-fits have
securely snapped into the holes before mounting
the phone on the wall.
Fig. 4
The delivery includes a template to be used for marking the position
of the holes to be drilled in the wall.
Use wall plugs, if necessary, and screws with half-round head
Use wall plugs, if necessary, and screws with half-round head
profiles (diameters of screws dmax= 4.5 mm (0.177”), diameters
of heads dmax=8 mm (0.315”)).
The screws must protrude approx. 0.5 cm (0.197”) from the wall
The screws must protrude approx. 0.5 cm (0.197”) from the wall
for easy wall mounting of the phone.